Posted by will (184.108.40.206) on June 01, 2004 at 19:49:51:
In Reply to: Changing Impeller posted by Dennis Lancaster on 18:54:53 06/01/04:
Hi dennis, you are in Bellingham, right. Will at nuclearengine.com. My antifreeze pump had the impeller changed a few days ago. I took the pump off and used a piece of cord to hold the pump up in the air by way of the fuel tank strap. This put the pump high enough that I could pull the cover and spill a few spoons of antifreeze. Mine is hard to change the cover where it is. The lower bolts needs a 3 inch extension on the ratchet and it is not bad. I have a bunch of gaskets ordered but they are not on my site yet. I made mine that is why I ordered more, Slight oversite on my part, can't think of everything.
Good luck Will